Start With the Two Numbers That Change the Experience
The Medium Yuri is a knotted dragon design, and the listing describes it plainly: smooth textures, increasing girth, and a large knot at the bottom. That means the useful question is not simply how long it is, but how much the shaft widens before you reach the base.
Two supplied measurements answer that. The widest shaft diameter is 2.4 inches, or 7.75 inches in circumference. The head, by contrast, is 1.2 inches in diameter with a 3.75-inch circumference. The jump between those two figures is the main thing to plan around.
This article walks through reading the Y-1392 measurements, understanding what Near Clear 31* means in the listing, and checking care information before purchase. Where the supplied listing is silent, that is noted as a limit rather than filled in with guesswork.
Medium Yuri Y-1392 Measurements
- Medium Yuri -- Near Clear 31* silicone -- Y-1392: Total length: 6 inches; useable length: 5.25 inches The difference between total and useable length tells you how much of the piece is actually insertable, which matters more than the overall figure.

Medium Yuri -- Near Clear 31* silicone -- Y-1392 - Medium Yuri -- Near Clear 31* silicone -- Y-1392: Diameter of the head: 1.2 inches; circumference of the head: 3.75 inches The blunt, scaled head is the narrowest part, so this is the starting point before the shaft widens.
- Medium Yuri -- Near Clear 31* silicone -- Y-1392: Widest shaft diameter: 2.4 inches; circumference of the shaft: 7.75 inches This is the widest point of the shaft and the number to compare against what you already know works for you.
- Medium Yuri -- Near Clear 31* silicone -- Y-1392: Base diameter: 4.25 inches The listing describes a wide, scaly base for stability, and this measurement shows how much footprint it takes up.
Reading the Shape Before You Buy
The listing's design note is the clearest guide to how the Medium Yuri behaves: a blunt head with scales for gentle texture, then increasing girth, then a large knot at the bottom. The base is described as wide and scaly for stability.
Put the numbers beside that description and the progression is easy to picture. You begin near the 3.75-inch head circumference, move through a shaft that reaches 7.75 inches at its widest, and finish at a knot the listing calls large. The base diameter of 4.25 inches is the widest single figure in the record.
Because the listing gives approximate measurements, treat them as a guide rather than a precision spec. It does not state a knot diameter separately from the widest shaft figure, so if the knot is your main concern, the 2.4-inch widest shaft diameter and 7.75-inch circumference are the closest supplied references.
What Near Clear 31* Means in This Listing
Near Clear 31* is the firmness named for this Medium Yuri, and the listing points readers to the store's Our Silicone page for information on silicone firmnesses. That page is the place to check for a full explanation of what the 31* designation means.
The supplied product record does not include a shore rating, a squish description, or a comparison to other firmnesses, so this article will not invent one. What the record does confirm is the material family: silicone, in a Near Clear finish, offered in pink, blue, and green.
If firmness is your deciding factor, read the Our Silicone page before ordering rather than assuming Near Clear 31* behaves like another firmness you have tried. The listing treats firmness as something to look up, not something to infer from the name.
A Sensible Order for Getting to Know the Medium Yuri
The listing does not prescribe a usage procedure, so these are checkpoints for reading the product rather than manufacturer instructions. They follow only from the supplied measurements and design notes.
- Compare the head first: At 1.2 inches in diameter and 3.75 inches in circumference, the blunt head is the narrowest insertable point. If that figure is already outside your experience, the rest of the shaft will be a bigger step.
- Then compare the widest shaft: The 2.4-inch diameter and 7.75-inch circumference are the largest shaft figures in the record. Use these, not the head, as your real comparison point.
- Account for the knot and base: The listing describes a large knot at the bottom and a wide, scaly base measuring 4.25 inches across. Plan for that width as part of the overall footprint.
- Check the length against your expectations: With 5.25 inches useable out of 6 inches total, most of the piece is insertable. The remaining length is the base end.
Care and Cleaning: What the Listing Confirms
The supplied record for the Medium Yuri does not include cleaning instructions, material compatibility guidance, or storage recommendations. It also does not include preparation or operating steps. That absence is a limit of the supplied evidence, not a statement that the store provides no guidance anywhere.
The listing does direct buyers to the store's Store Policies and Shipping Policies before purchase. Those pages are the right place to check for handling, returns, and shipping details rather than relying on assumptions.
For a silicone toy, the listing's own reference points are the two policy pages and the Our Silicone page. If you want confirmed care instructions before buying, read those pages first. This article will not supply temperatures, cleaners, or storage methods that the record does not contain.
One practical note that does follow from the record: the listing describes scales on the head and a scaly base. Those textured areas are part of the design, so when you do consult the store's care guidance, keep the textured sections in mind.
Color and Variant Details
- Medium Yuri -- Near Clear 31* silicone -- Y-1392: Color options: pink, blue, green These are the three colors named for this Medium Yuri, so you can choose a finish before ordering.
- Medium Yuri -- Near Clear 31* silicone -- Y-1392: Available variant: Standard The record lists a single Standard variant, which keeps the choice focused on color rather than multiple configurations.
Who the Medium Yuri Suits
The Medium Yuri rewards someone who wants a clear progression rather than a uniform shape. The blunt, scaled head gives a gentle start, the shaft widens steadily to 7.75 inches in circumference, and the knot and wide base finish the design.
If you already know that a 2.4-inch widest diameter is more than you want, the measurements say so plainly, and no amount of firmness choice changes that. If the head at 3.75 inches circumference sounds comfortable and the widest shaft sounds like a goal rather than a barrier, the shape is doing what the listing describes.
Near Clear 31* is the firmness attached to this particular listing. Because the supplied record does not describe how that firmness feels, the honest next step is the Our Silicone page, followed by the Store Policies and Shipping Policies pages for everything the product record leaves open.


